BAC Forum

General Boards => Technical Support => Topic started by: Lawrence Tarnoff on June 22, 2018, 06:56:56 PM

Title: See-level install
Post by: Lawrence Tarnoff on June 22, 2018, 06:56:56 PM

Hitting a snag on our install of tank monitoring system.  Easy access to black and gray tanks, but tech says fresh water tank encased in metal with no easy access for the senders.  Any ideas?

Title: Re: See-level install
Post by: Jim Nichols on June 23, 2018, 05:05:57 AM

If your tank level is visible from your bay door on the right side then access is in the bay next to it. The carpeted wood panels are held in place with wood screws. The tank sensor is in the middle of the 100 gallon tank. We just installed Sea Level system and they work great.

Title: Re: See-level install
Post by: Stan Simpson on June 23, 2018, 02:49:01 PM

Bruce,
Here are pictures of our See Level. Our water tank is behind the front tire on the curbside, along with the Hydro Hot. Hope this helps, and you get it installed. Ours is the model that plugs in to the Aladdin interface module.

Title: Re: See-level install
Post by: Bill Staley on June 23, 2018, 03:06:41 PM

What See-level system are you installing?  I am trying to find one of the systems that plug directly into the Aladdin system and am being told that it has been discontinued.  I can't find anyone that has one.

Title: Re: See-level install
Post by: Lawrence Tarnoff on June 24, 2018, 01:45:38 PM

Bill ...

I also wanted to link to Aladdin but could not find the interface.  The Bluetooth to iPhone is quite satisfactory.

Title: Re: See-level install
Post by: Michael Rump on June 25, 2018, 02:07:28 AM

Bill and Lawrence,

I heard they were having trouble with the Aladdin interface.  Try calling Garnet Systems at 877.668.7813 for an update.

Regards,