BAC Forum

General Boards => Technical Support => Topic started by: Don White on July 05, 2018, 09:29:21 PM

Title: Excessive Windshield Wiper Arm Travel
Post by: Don White on July 05, 2018, 09:29:21 PM

I am having a problem with the drivers side windshield wiper arm.  The arm is traveling to far to the left. It actually travels off the windshield and past the windshield pillar and becomes stuck.  This happens at any speed over 25 mph.  I have to stop and get out of the coach and manually push the arm back onto the windshield,  The blades are 32 inches long.


Curious if anyone else has had a similar issue and what the cure was.


Thanks

Don
06 Beaver Marquis Jade IV

Title: Re: Excessive Windshield Wiper Arm Travel
Post by: Joel Ashley on July 05, 2018, 09:50:25 PM

Review these threads from a few years ago, Don.
http://beaveramb.org/forum/index.php/topic,1650.msg11596.html#msg11596

http://beaveramb.org/forum/index.php/topic,5281.msg39556.html#msg39556

Try asking at Diesel Equipment Company's Wiper dept.
1-877-307-7059 (Wiper Technologies).

Also, apparently Monaco had more than one supplier of wiper systems, so you might check AM Equipment's website also, here in Oregon:
http://www.amequipment.com/03_radial_wiper_arms.html

Joel