BAC Forum

General Boards => Technical Support => Topic started by: Marty and Suzie Schenck on November 30, 2018, 12:45:05 AM

Title: HWH Leveling System location
Post by: Marty and Suzie Schenck on November 30, 2018, 12:45:05 AM
Asking for a friend, can anyone tell me the location of the brain for the HWH leveling system on a 2006 Patriot Thunder Vicksburg? Thanks
Title: Re: HWH Leveling System location
Post by: David T. Richelderfer on November 30, 2018, 01:28:06 AM
In the absence of a reply, I will submit that on our coach, built by Monaco, the HWH leveling system control/brain is in an aluminum box fixed to the ceiling of the electrical bay fore of the left front wheel.
Title: Re: HWH Leveling System location
Post by: Scott Shearer on November 30, 2018, 02:55:35 AM
Ours is located behind a removable panel in the ceiling of the driver’s side most forward storage compartment.
Title: Re: HWH Leveling System location
Post by: Roy Warren Co-Admin on November 30, 2018, 05:25:18 AM
Marty,
Mine is located in the electrical bay below the driver's seat.  Good luck.
Roy Warren
Title: Re: HWH Leveling System location
Post by: Joel Ashley on November 30, 2018, 05:41:30 AM
If there are problems with leveling, not air leak related, on another computer I have photos and instructions for adjusting the unit, which on mine is also on the electric bay ceiling, just not behind a panel like the Patriot.  Let me know.  They may still also be searchable here as I’ve posted them before.

Joel

Title: Re: HWH Leveling System location
Post by: Marty and Suzie Schenck on December 01, 2018, 10:12:24 PM
Thank you everyone for the replies. Scott, yours is where he found it.
Title: Re: HWH Leveling System location
Post by: Lee Welbanks on December 02, 2018, 02:06:23 AM
Asking for a friend, can anyone tell me the location of the brain for the HWH leveling system on a 2006 Patriot Thunder Vicksburg? Thanks
On my 06 Patriot Thunder the control boxes are in the ceiling middle of the 2nd basement compartment the fuel tank being the 1st. There is a panel you have to remove to get at them. Mine has two boxes stacked and of course to calibrate the leveling sensor it is a real treat.