BAC Forum
General Boards => Technical Support => Topic started by: Mark Beavin on January 01, 2019, 09:46:04 PM
-
Where is a good source for a breakdown on the power seats for my 1996 Beaver Monterey? Also where can I get parts for this. One gear on one side is bad and the end cap that holds the driver shaft aligned is broken out, ( Plastic) I need 1 new metal gear and the alignment cap and should probably replace the driver screw.
-
Mark,
I think your seats were supplied by Villa. They are still in biz so I'd start with them before trying the salvage places.
Steve
-
Thanks Steve. Will look them up.