BAC Forum
General Boards => Technical Support => Topic started by: Steve Huber on June 01, 2019, 05:19:45 PM
-
The diagrams show an 80A fuse or thermal breaker feeding 12v to the Lippert hydraulic pump on my coach (07 Contessa). Does anyone know where it is located? Didn't find it in the rear electrical box and doesn't appear to be at the pump, though access is tough.
TIA Steve
-
Steve, we found a thermal breaker to the right rear against the wall that tripped when our gen slide would not extend. Maybe this is what you are looking for.
-
Bryan,
Thx! I found the Tbreaker on the wall next to the Lippert pump. Access was tough but verified no voltage on either side. Then went back to the rear electrical bay and "met the enemy and he is me!". I corrected the AGS wiring a month ago or so as Monaco wired it so the AGS monitored the chassis batteries and the generator start came from the house batteries, just opposite of what it should be IMHO. I had to disconnect most to the large cables to re-wire and in reconnecting them, I inadvertently (love the word) hooked up the Lippert pump power to the 60A fuse and the front elect bay PCB to the 200A fuse.:(
Boy am I glad I didn't have to extend the geni on our trip last month... Now waiting for Amazon to deliver the 60A fuse. Also ordered spares for all the ANL fuses as ACE, HD and Lowes don't carry them since they are used mainly in audio equipement.
Steve