BAC Forum
General Boards => Technical Support => Topic started by: Grant Hayden on August 02, 2019, 11:06:09 AM
-
My fresh water, grey, and black tank level gauges are not reading correctly. I tried to purchase the Garnet 709-RP that will interface with the Alladin system in my 2006 Beaver Monterey IV but they are no longer manufactured. Any suggestions on where to purchase one or an alternative to my situation.
Thanks
Grant
-
Grant, The Aladdin Tank module failed on my Patriot not long after we bought it in 2015. The shop was able to find a used but good module and all works fine now. An RV salvage yard maybe your best bet (Colaws, Verunkins, maybe others.) On our travel trailer, I installed a SeaLevel system, easy and it works great. You can get these with a remote (or two) display so you can see your tank levels at the wet bay and at a convenient place in the coach. And, if money is no object, the whole Aladdin system can be replaced with the Silverleaf system (Albany Or.) for $5-7K. Food for thought.
-
Or Google
https://www.google.com/search?q=aladdin+tank+interface+module&rlz=1C1CHBF_enUS720US720&oq=aladdin+tank+interface+module+&aqs=chrome..69i57.7573j1j4&sourceid=chrome&ie=UTF-8
-
Catcon Products has the level sensor p/n 500-10050-07 for $52.50. I have used them in the past. Just google Catcon Products or the part number. Also found Veurinks R V has them .
-
I found the module on EBAY, Thanks. When I install it do I need to shutoff the house power ? or any other procedure I need to follow?
-
The tank module has a power plug that you just plug into the module. You should see a red LED light up when you plug it in, that will tell you the module has 12v power. You might have to recalibrate your tank sensors, well not the sensors exactly but the Aladdin. Look to the Coach Assist section in the forum for the Aladdin tank recalibration instructions. The most accurate cal is done by emptying then filling the tanks. There is also a 'count' per inch of tank depth method.
-
Great. Thanks
Grant