BAC Forum

General Boards => Technical Support => Topic started by: jeffprupis on August 29, 2019, 10:50:37 PM

Title: Dreaded stair fail
Post by: jeffprupis on August 29, 2019, 10:50:37 PM

My build sheet says SCS is the mfg of our entry step. Have they been bought by Lippert?
The articulating head bolt at the end of Electric Step Double Ball Joint assembly snapped (see attached)
Any idea where to get one or do I need to buy the whole assembly?

Title: Re: Dreaded stair fail
Post by: Steve Huber on August 29, 2019, 11:05:35 PM

SCS Frigette was acquired by Lippert.
Steve

Title: Re: Dreaded stair fail
Post by: Stan Simpson on August 30, 2019, 03:21:49 AM

Here is a link to Lippert's online parts store.

https://store.lci1.com/home

Title: Re: Dreaded stair fail
Post by: Fred Brooks on August 31, 2019, 05:44:22 PM

    Hey Jeff,
I found one of these in my tool box from a repair I did 8 years ago. Not sure which side you need, but I'll give it to you if you can use it. Fred

Title: Re: Dreaded stair fail
Post by: jeffprupis on September 02, 2019, 01:31:39 AM

Thanks Fred, but yours seems to be broken same as mine. For $40 I'll order a new one from Lippert. And I'll throw the old one in MY tool box so I can offer it to someone in 8 years, hopefully. Thanks,