BAC Forum

General Boards => Technical Support => Topic started by: Bobby Kirk on December 27, 2019, 05:29:46 PM

Title: Black Tank
Post by: Bobby Kirk on December 27, 2019, 05:29:46 PM

Have a 06 Beaver Marquis with Aladdin system.. When I calibrate my tanks the black tank has the same RAW value for
full and empty (1023) have a new sensor installed and am getting crazy numbers. Any help appreciated .

Bobby Kirk

Title: Re: Black Tank
Post by: Jim Edwards on December 28, 2019, 12:06:51 AM

If you have the catcon sensors you may need to replace the "phone" connector on the end of the cable. I believe it is an rj45. 

Title: Re: Black Tank
Post by: Bill Lampkin on December 28, 2019, 02:49:44 AM

I think Aladdin uses all rj11 (4 pin) connectors, just like a regular telephone (remember those?) cord. An rj45 is used for ethernet, and is a 6 pin connector.

Title: Re: Black Tank
Post by: Bobby Kirk on December 28, 2019, 02:55:28 AM

Thanks for the info will replace the end.  Thanks

Title: Re: Black Tank
Post by: Dennis Belfils on December 30, 2019, 09:29:11 AM

We have the same problem, but with the Fresh tank. 1023 on both. Tried new phone line, but no change. Thinking it is the module, but not sure how to confirm.