BAC Forum
General Boards => Technical Support => Topic started by: Dennis Belfils on March 05, 2020, 07:48:41 PM
-
Does anyone know where to get replacement labels, for the Vanguard water manifold located in the wet bay?
-
I had to touch up the wet bay panel labels, I used a Brother P Touch labelmaker. Very close to original. I tried to insert photo. but my pic is too big and I am too old to resize (the pic).
-
Call the company: https://kscdirect.com/search_results.php?q=Vanguard%2BPlumbing%2BACCESSORIES
But as Bill suggests I’d use a label maker. I use either my Dymo Labelwriter 450 or my Dymo LatraTag, depending on the need. Both use thermal printing rather than ink. The Labelwriter requires a computer but can make larger labels, such as for addressing envelopes.
The LetraTag is probably more appropriate for your current project, being portable; its plastic label option would be more moisture resistant. The only negative aspect I’ve found is the clumsy design to peel backing off after creating a label. But practicing technique has made it easier.
https://www.dymo.com/en-US/labelwriter-450-label-printer
https://www.dymo.com/en-US/letratag%3Csup%3E®%3C-sup%3E-plus-lt-100h-letratag-plus-lt-100h-silver
As Bill notes, Brother makes appropriate devices also and I’ve been tempted by several of their models, but already owned the Dymos.
https://www.brother-usa.com/ptouch/home?gclid=CjwKCAiA44LzBRB-EiwA-jJipKCPrnfai7dh3YvXMzLYVkxK1dHEtYKWqTlDXQNOYaEY_ZeVuRJsExoCyTwQAvD_BwE&ef_id=CjwKCAiA44LzBRB-EiwA-jJipKCPrnfai7dh3YvXMzLYVkxK1dHEtYKWqTlDXQNOYaEY_ZeVuRJsExoCyTwQAvD_BwE:G:s
The point is you’ll find many future uses for such machines, so shop around and don’t be put off by prices.
Joel
-
Thanx to you both. I will pick up a label maker as we could use it for other things too...……….