Author Topic: Entry door hinge problem - 06 Marquis  (Read 2637 times)

Don White

  • BAC Member
  • *
  • Posts: 76
  • Thanked: 4 times
Entry door hinge problem - 06 Marquis
« on: April 15, 2024, 10:01:30 PM »
I noticed that the hinge pin in the hinge on the entry door has slipped down 3". 

Two questions:

1. What is supposed to keep the hinge pin in place in the hinge?

2. Any suggestions on how to slide the pin back up into the hinge and keep it in place?

Thanks
Don White
2006 Marquis Jade IV C13
2019 Jeep Wrangler
Hydralift
2006 HD Fat Boy
1997 Safari Serengetti

Bryan Beamon

  • BAC Member
  • *
  • Posts: 370
  • Thanked: 134 times
Re: Entry door hinge problem - 06 Marquis
« Reply #1 on: April 16, 2024, 04:13:41 PM »
Don, I take a counter sink used in setting nails below the surface and tap the hinge pin back in Place. I have done this when it appears to slip but never saw it 3 inches out of alignment. It has needed the realignment  about once a year. We live full time so the door gets lots of action
C & Bryan Beamon
2006  to present
2007 Contessa 42ft Cat C-9 400hp
1996 to 2006 97 Beaver Patriot Camden
The following users thanked this post: Don White