Good morning,
I have the Trace/Xantrex SW2512MC inverter. On the remote panel inside the coach, I noticed a couple display characters never seen before. They are solid boxes with a diagonal line emanating from each, one above the “SRCH” label and one above the “CHG” label (see photo 1). Does anyone know the meaning of those characters?
I crawled in the basement and looked at the readout panel on the inverter itself (see photo 2) and the left-most character on both lines are incomplete. You can see the hash mark under the “CHG” label plus I witnessed the BULK then FLOAT lights displayed in sequence over time, so I’m assuming it is working. The top line seems to be displaying “Set Inverter”. Any idea what that implies?
More recently, the inside remote panel changed its display information and now several percentage values are listed (see photo 3). Any ideas on why this happened? I have no control of this panel.
I read through the operating manual for the inverter and nothing addresses these issues. Unfortunately, Trace/Xantrex no longer provides technical support on this model so they are not helpful either. I did read where a factory reset can be performed, with instructions in doing so. Does this sound like the next logical step and if so, any concerns associated with the process?
Thank you in advance for any assistance.
Mark