Kwikee Steps not working...

[Rick Penick]

 Appreciate any input on steps. Worked fine since i replaced the magnetic switch about a year ago than i go out and nothing, I got a battery tried getting the step motor to work nothing not sure i did it right or not. Steps are series 39 Kwikee brand.

Thank you
Rick

[Eric Maclean]

Rick
Lippert bought kiwik step years ago
This link should take you to several kiwiki manuals one of which will have the wiring diagrams and troubleshooting .

https://www.google.com/search?q=kwikee+39+step+manual&client=tablet-android-lenovo-rev2&sxsrf=ALiCzsZF12dEtLUaRdbBOBD8MFnNF8U_JQ%3A1667072500500&ei=9IFdY4T7HczdptQP56qx4AI&oq=kwikee+39+step+manual&gs_lcp=ChNtb2JpbGUtZ3dzLXdpei1zZXJwEAMyCAghEMMEEKABOgoIABBHENYEELADOgQIIxAnOgYIABAHEB46BQgAEIAEOgUIABCGAzoFCAAQogQ6BwgAEB4QogRKBAhBGABQ2hNYuihghi1oAXAAeACAAaMCiAGUBZIBBTAuMi4xmAEAoAEByAEIwAEB&sclient=mobile-gws-wiz-serp

Eric

[Steve Huber Co-Admin]

Rick,
In addition to Eric's sources, there is a comprehensive write-up on step maintenance in Common Problems. (BAC Website, Technical, Common Problems.
Steve

[Rick Penick]

Thank you gentlemen !!

Rick

[Eric Maclean]

Rick
on my coach I have had issues with the connections in that four wire plug in the harness to the step

[Fred Brooks]

    Rick,
Another common trouble location is the green 10 gage ground wire. It is the only exposed connection to the frame and is subject to road moisture and salt residue. Some technicians butt splice into this wire when replacing the step module rather than replacing the eyelet and self-tapping bolt. As Steve suggested, please read the comprehensive step trouble shooting guide under "common problems".
Fred Brooks

[Roy Boles]

  I hade the same thing happen to me when I was leaving a friends house. The step decided to stop working. I had to replace the motor. I think I ordered one from Amazon. There were numbers on the old motor that I used to identify a replacement.