Author Topic: Slide out sweeper seal  (Read 1226 times)

Adam Hicklin

  • Guest
Slide out sweeper seal
« on: February 15, 2023, 04:23:56 AM »
Any advice on replacing this sweeper seal on top of the slide?

And in general, are the seals around the perimeter replaceable by a mildly mechanically gifted Beaver owner?  Some areas seem accessible but I don’t know how they are attached. 

Steve Hutchins

  • BAC Member
  • *
  • Posts: 16
  • Thanked: 1 times
Re: Slide out sweeper seal
« Reply #1 on: February 15, 2023, 01:37:00 PM »
I just replaced mine on the bedroom slide,  not sure if it is the same style that you have.  Fairly easy if it glues on like mine did, just need to spend time cleaning/scraping the old seal off.  Helps if it is a warm day to put the new seal on, more flexible to handle. 


https://www.rvupgradestore.com/White-Rubber-Slide-Out-Seal-With-Wiper-p/13-1060.htm

Steve
Steve

2002 40 Ft. Beaver Patriot
Cummins 400hp ISL

Adam Hicklin

  • Guest
Re: Slide out sweeper seal
« Reply #2 on: February 15, 2023, 03:18:36 PM »
It’s hard to see, but mine attaches on the inside of the slide cut out. The slide itself doesn’t press up against it when the slide is closed, if that makes sense. I haven’t actually checked to see how it is attached.