Author Topic: Cat 3126B Fan Drive Lube  (Read 1472 times)

Jack W Hannah

  • BAC Member
  • *
  • Posts: 62
  • Thanked: 7 times
  • 713 248-5405
Cat 3126B Fan Drive Lube
« on: February 09, 2024, 05:11:23 PM »
Recently a diesel mechanic indicated  that my Caterpillar 3126 B in my 2002 Patriot is not equipped with a lubrication fitting for the fan drive bearing and it would be necessary to remove the radiator if it had one. My Caterpillar manual indicates that this is a routine maintenance item. Are these 3126 B engines in Beavers typically equipped with this lubrication point?

TIA
Jack Hannah
2002 Patriot 40B, Monticello
Cat 3126, Magnum Series B

Steve Huber Co-Admin

  • Administrator Group
  • *
  • Posts: 3511
  • Thanked: 2694 times
Re: Cat 3126B Fan Drive Lube
« Reply #1 on: February 10, 2024, 01:13:17 PM »
Jack,
If I remember correctly, my 3126B had a grease zerk behind the fan itself.
Steve
Steve
2015-          07 Contessa Bayshore C9,  400 hp
2013-2015: 00 Marquis Tourmaline, C12, 425 hp
2005-2013: 01 Contessa Naples, 3126B, 330 hp
The following users thanked this post: Jack W Hannah

Eric Maclean

  • BAC Member
  • *
  • Posts: 1202
  • Thanked: 446 times
  • Karen and I would like to wish you all happy trail
Re: Cat 3126B Fan Drive Lube
« Reply #2 on: February 10, 2024, 01:31:43 PM »
1997 Patriot Yorktown
3126-B
2009 Chevy HHR
Roadmaster falcon tow bar
Demco Air Force one tow brake.
The following users thanked this post: Jack W Hannah

Richard Davis

  • BAC Member
  • *
  • Posts: 210
  • Thanked: 86 times
Re: Cat 3126B Fan Drive Lube
« Reply #3 on: February 10, 2024, 07:11:58 PM »
The grease zerk on my '98 3126 was hard to get to and hard to even see.  I had to crawl back thru the closet on top of the engine and look straight down with a flashlight on top of the fan bearing.  If someone had not told me it absolutely was there, I would not have gone looking for it and found it.  That was in 2008 and I suspected it had never been greased.  Good luck with your search.
Richard
06 Monterey Ventura IV, C9 400 hp
The following users thanked this post: Jack W Hannah