Trace RC7 GS + Alladin

[Mark Robbins]

New member here


i have a 2003 Beaver Monterey, just purchased it needs some repairs I am fine with that, but since i have come from a 2018 gasser I am kind of perplexed on the relationship between Alladin and all the other systems. My biggest one right now is my Xantrex Screen RC7 GS has no power at all nothing showing at all, someone before me did a residential fridge change out as well as a new microwave, I am starting on these systems get them up and running and then I will address the Hydro hot.....already ordered the FASS fuel system as well as new leveling Jack.

Any guidance on this would be greatly appreciated

[Steve Huber Co-Admin]

Mark,
Make sure the telephone type cable is plugged in at the back of the display panel and at the inverter. Also suggest you clean the contacts with contact cleaner.
Steve

[Bill Lampkin]

when i replaced our fridge with a residential fridge, I also replaced the xantrex inverter with a new sine wave model; new remote panel too. You might check to see if your inverter has been replaced.

[Richard Davis]

Mark
Since you mentioned the Fass system, that implies that your Monterey has the Cummins engine.  Just curious since my Monterey has the CAT engine.  I did not know that Beaver sometimes used Cummins engines.  It is my understanding that the Fass system is not compatible with CAT HEUI motors.  Can you clarify for me. 
Richard

[Joel Ashley]

According to brochures in Coach Assist, Richard, in the early 2000's era you might find a Marquis with a CAT or a Patriot or a Monterey with a Cummins.