BAC Forum
Supporting the RV Lifestyle
Show the most recent posts.
Welcome,
Guest
. Please
login
or
register
.
1 Hour
1 Day
1 Week
1 Month
Forever
Login with username, password and session length
News:
Home
Help
Gallery
Login
Register
BAC Forum
»
General Boards
»
Technical Support
»
Ignition switch does not stop C12
« previous
next »
Print
Pages: [
1
]
Go Down
Author
Topic: Ignition switch does not stop C12 (Read 4496 times)
Jeremy Parrett
Guest
Ignition switch does not stop C12
«
on:
October 26, 2011, 03:43:52 AM »
Tonight when I switched off the C12, it just kept running........until I switched off the dash air conditioning!!
Anyone got any ideas
?
I restarted with the dash a/c running, and when I switched the ignition off, the C12 kept running, until I switched off the dash a/c !!!! :-/
«
Last Edit: October 27, 2011, 12:06:26 AM by 14
»
Logged
Keith Oliver
Guest
Re: Ignition switch does not stop C12
«
Reply #1 on:
October 26, 2011, 04:09:14 PM »
On mine it was the headlights. Not every time, but now I shut the headlight switch off first.
Logged
Richard And Babs Ames
Guest
Re: Ignition switch does not stop C12
«
Reply #2 on:
October 26, 2011, 05:24:30 PM »
Could these be caused by loose grounds and backfeeding through the ignition or fuel cutoff? The fuel cutoff stays open when power is applied and cuts off fuel when switched off.
Logged
Tom and Pam Brown
Guest
Re: Ignition switch does not stop C12
«
Reply #3 on:
October 26, 2011, 10:25:12 PM »
It might just need a new switch. I think there is a previous post with replacement information.
«
Last Edit: October 27, 2011, 12:07:10 AM by 14
»
Logged
Jeremy Parrett
Guest
Re: Ignition switch does not stop C12
«
Reply #4 on:
October 27, 2011, 12:04:36 AM »
Tonight in Balmorhea, TX, after a 400 mile drive, the C12 cut off when the ignition was turned off. Going to check the fuel cuttoff switch and grounds, when we get to San Diego CA
Thanks for the input.
Jeremy and Jane
Logged
Steve Jewell
Guest
Re: Ignition switch does not stop C12
«
Reply #5 on:
October 27, 2011, 01:09:54 AM »
It is more than likely the AC relay, since it shuts down when you turn the AC off. You can try just swapping the relay with another one near it, just make sure it is the same number. Let me know, if you need to know where it is.
Steve J
«
Last Edit: October 27, 2011, 05:31:41 AM by 14
»
Logged
Print
Pages: [
1
]
Go Up
« previous
next »
BAC Forum
»
General Boards
»
Technical Support
»
Ignition switch does not stop C12