Hey Guys, Just a heads up. As you may remember I just had to spend a lot of money replacing my radiator, charge air cooler, fan, and fan bracket due to my hydraulic motor cooling fan bracket breaking in British Columbia, Canada. I was looking at the repaired cooling fan when I noticed the lower support arms on the bracket were bending in allowing the fan to intrude further into the shroud. This was after only 2,100 miles on the new bracket. I contacted BCS and was told that Radiator Supply House in Sweet Home Oregon made the new bracket and that I should talk to them about it. After e-mailing several pictures and visiting with them on the phone they agreed that this was another disaster waiting to happen and the bracket they made was insufficient for the forces it was dealing with. They are now in the process of making me a new, improved bracket which I will again have to pay to have installed to replace the bad one they sent me. So after spending over $12,000 to get this problem fixed it looks like I will be spending more to correct this new problem. I'm just glad I took a look at it and didn't take for granted that the bracket they made was good enough. So again, check those brackets!