BAC Forum
Supporting the RV Lifestyle
Show the most recent posts.
Welcome,
Guest
. Please
login
or
register
.
1 Hour
1 Day
1 Week
1 Month
Forever
Login with username, password and session length
News:
Home
Help
Gallery
Login
Register
BAC Forum
»
General Boards
»
Technical Support
»
Right front hydraulic jack
« previous
next »
Print
Pages: [
1
]
Go Down
Author
Topic: Right front hydraulic jack (Read 4000 times)
Jeremy Parrett
Guest
Right front hydraulic jack
«
on:
October 12, 2012, 09:23:10 PM »
While blocking the coach up higher to extricate us from deep ruts we settled into in very soft grass, the left front jack managed to pull a wire sensor/connector from its fitting. Everything works fine...levelling etc .
I am at a loss to know what this single black wire and pencil sized hollow push on connector is for !! It dangles on 2 feet of tough single black wire.
Anyone got any ideas please???
Logged
Gerald Farris
Guest
Re: Right front hydraulic jack
«
Reply #1 on:
October 12, 2012, 09:31:11 PM »
Jeremy,
The wire is to a magnetic sensor that tells the system when the jack is extended. The leveling system will work perfectly well with the wire off, however there will be no warning if the jack is extended.
Gerald
Logged
Jeremy Parrett
Guest
Re: Right front hydraulic jack
«
Reply #2 on:
October 13, 2012, 03:26:16 AM »
Gerald,
thank you for the info. Where does the connector attach to the sensor ?? I cannot find the sensor.
Logged
Gerald Farris
Guest
Re: Right front hydraulic jack
«
Reply #3 on:
October 13, 2012, 03:34:41 AM »
Jeremy,
The switch should be located in the top of the jack.
Gerald
Logged
Jeremy Parrett
Guest
Re: Right front hydraulic jack
«
Reply #4 on:
October 13, 2012, 03:37:11 AM »
Gerald, thank you. I will look in the daylight.
Logged
Print
Pages: [
1
]
Go Up
« previous
next »
BAC Forum
»
General Boards
»
Technical Support
»
Right front hydraulic jack