Dick,
You might want to consider routing your sound back from the TV (optical or headset output) to the Bose system instead of getting the input from the sat receiver. Advantage is that you then are able to get the Bose quality sound regardless of your video source, rather than limiting it to the sat rcvr only.
Steve
That's a good point but we've not any other feed as the sat is the only thing we have used. Upside is that I can use the music channels without the TV on. However, that said, I do have anlog audio out from the TV going someplace and I think that may be how Danny got the BluRay sound to the Bose. It has something to do with a Radio Shack two button switch that's labeled Sat on one button and VCR on the other. All he said is that switch controsl the input to the Bose. Guess I need to dig into the wires a bit deeper and without the TV or Sat reciever installed right now this is a good time to do that.
Guess I also need to figure out what the mulitpe button box does in the left hand cabinet by the curtain switch. I haven't noticed then doing anything but who knows.
I kind of like Ed's thought about burnng in the set for awhile. I could set it up in the house and run the sat reciever signal into it. We have never used the over-the-air antenea nor the park cable input so I'm not too concerned about that. If we don't have sat, I have lot's of programs on the reciever DVR that we watch....if all else fails we would just read.
I just got the articulating arm and it appears I went a bit overboard on the size.....one may be able to do chin ups on it. Oh well something else to ponder. Now I found one with a 20" extension for $25.00 instead on the 14" one I bought. That would move the TV another 6" closer to the coach centerline.
Tommarrow, I will mount the Visio and see what it looks like than consider a differant mount. Also will mount the 32" mockup and see it all comes togeather. Great fun.