Thanks Ed, the daytime running light module , I was using wasn't made by VIP, it was some aftermarket brand, and that's good advise on the wiring method. But that is the least of my worries, right now. As I mentioned earlier, I got everything but the cruise control, working after disconnecting the DT RL module, and after talking to a tech at VIP, I found out that the cruise won't work unless a jumper at the JP1 position on the board, is in the same position as the original one, which mine wasn't . But yesterday when I went to make that adjustment, everything was inoperable once again, got on the phone again with Smartwheel and after some testing ,realized that somehow the board has been damaged again. Victor at VIP told me to really check the two wires that run to the steering wheel, so I dismantled the wheel , got into the clock spring mech , ran continuity tests on both wires and there is nothing wrong with them. I have a new controller ordered ,but hate to install it , not knowing the cause of the problem, especially when they are , with shipping , $300.00 apiece .