Author Topic: Climate Control Panel - No HEAT ZONES  (Read 2426 times)

Rick Vyncke

  • BAC Member
  • *
  • Posts: 124
  • Thanked: 11 times
Climate Control Panel - No HEAT ZONES
« on: August 16, 2013, 05:26:56 PM »
Our 2004 Marquis has two climate control panels that control 3 different zones.  Panel in the bedroom controls zones 2 & 3 (Bedroom and Shower Zones).  Panel in living area controls Zone 1.

The problem is that the Living Room Zone 1 Control Panel does not have a FURNACE option.  It has A/C, Heat-Pump (this comes from the A/C ducts), Fan, and Off.  There are three furnace ducts in the living area.  Local dealer said that there is a control panel that has dip switches to enable this but they cannot find it.... and this is getting expensive.

Anybody have any idea why that control panel does not have the FURNACE option and how to fix?

Thanks
Rick V
2004 Beaver Marquis, Garnet (3 slides)
43'
C12

Roy C Tyler

  • Guest
Re: Climate Control Panel - No HEAT ZONES
« Reply #1 on: August 16, 2013, 06:25:06 PM »
I am new to Beaver coaches as we have only had ours for 3 weeks but I was told on the walk around that the front controls the front air and front heat pump and the rear controls the rear air, rear heat pump and the furnace.  The furnace is big enough that it heats the whole coach through all of the vents.