Headlight switch

[Adam Hicklin]

I pulled the headlight switch to turn on the headlights and the knob with attached shaft came all the way out!  I put it back in and was able to apply some side tension to pull it out and get the lights on, but this is a problem.  Question is, can this be fixed, or do I need to replace the whole switch?  While I'm at it I may as well replace the hi beam/lo beam floor switch because every time I step on it, all the lights go out!  Once I get the switches working, I'll do the headlight fix.  

Any words of wisdom?

[Tom and Pam Brown]

Take the old one out and take it to an automotive parts store for the to match.

Dimmer switch should be easier.

[Steve Huber Co-Admin]

I think it is a GM switch. If the shaft keeps coming out, the switch needs replacement.
Steve