2000 Marquis w/Hurricane. Just finished replacing the water heater and installing a block heat exchanger. Took me a while to eliminate (w/Jim Rixen's help) an airlock in the Hurricane antifreeze system. System appear to be running correctly.
However, I seem to be having another problem. I have 2 recirc pumps in the Hurricane bay. One is the Hurricane antifreeze pump. It runs for specified time whenever I switch the Hurricane On-Off switch on then off, as long as the remote switch is on. It makes no difference what position the Coach Heat and Preheat switches are in.
The Preheat pump does not run (no voltage) under any of the conditions I've tried; key on, off, engine running. etc. The lamp in the Pre heat switch is good but never lights so it appears I'm not getting voltage to the switch.
Is there some setting I'm missing or do I have a problem?
New coach for me so don't know what "normal" is. My Contessa used hot air as preheat.
Thx, Steve