BAC Forum
Supporting the RV Lifestyle
Show the most recent posts.
Welcome,
Guest
. Please
login
or
register
.
1 Hour
1 Day
1 Week
1 Month
Forever
Login with username, password and session length
News:
Home
Help
Gallery
Login
Register
BAC Forum
»
General Boards
»
Technical Support
»
Ford Edge/Lincoln tail lights
« previous
next »
Print
Pages: [
1
]
Go Down
Author
Topic: Ford Edge/Lincoln tail lights (Read 3638 times)
Mike Humble
BAC Member
Posts: 118
Thanked: 54 times
BAC Past President 2014-2018
Ford Edge/Lincoln tail lights
«
on:
March 31, 2014, 03:55:15 AM »
We just purchased a new tow vehicle and experienced a problem when hooking up lights. The installer became frustrated and contacted Roadmaster. This problem has occurred before and there is a fix by installing a resistor in the right place. The tail lights worked fine and the brake and turn signals worked fine as long as they were tested separately. If the tail lights were on the turn signals would not function. This seems to be a problem on the new Ford/Lincoln with LED's. If this happens contact me for further details.
Mike Humble
«
Last Edit: March 31, 2014, 05:37:39 AM by 422
»
Logged
2008 Marquis 45' Cat C-15 600hp
Steve Huber Co-Admin
Administrator Group
Posts: 3512
Thanked: 2696 times
Re: Ford Edge/Lincoln tail lights
«
Reply #1 on:
March 31, 2014, 05:29:27 AM »
Mike,
Possibly simpler solution is to add separate lights in tail lenses that are hooked only to the tow harness. Toad electrical system is not in circuit. Blue Ox sells them. I've installed them on 2 toads with no interaction problems.
Steve
Logged
Steve
2015- 07 Contessa Bayshore C9, 400 hp
2013-2015: 00 Marquis Tourmaline, C12, 425 hp
2005-2013: 01 Contessa Naples, 3126B, 330 hp
Doug Neal
Guest
Re: Ford Edge/Lincoln tail lights
«
Reply #2 on:
March 31, 2014, 05:47:01 AM »
It probably needs a diode in the tail light feed?
Logged
Gerald Farris
Guest
Re: Ford Edge/Lincoln tail lights
«
Reply #3 on:
March 31, 2014, 11:04:57 AM »
Steve,
Installing an extra blub with the Blue Ox kit probably is not an option with the LED tail and stop light system because of the lack of clearance and the fact that there is no standard reflector.
Gerald
Logged
Mike Humble
BAC Member
Posts: 118
Thanked: 54 times
BAC Past President 2014-2018
Re: Ford Edge/Lincoln tail lights
«
Reply #4 on:
March 31, 2014, 01:06:24 PM »
There are appropriate diodes installed.
Mike
Logged
2008 Marquis 45' Cat C-15 600hp
Steve Huber Co-Admin
Administrator Group
Posts: 3512
Thanked: 2696 times
Re: Ford Edge/Lincoln tail lights
«
Reply #5 on:
April 01, 2014, 01:14:59 AM »
Gerald,
Thx for the clarification. LEDs certainly don't need teh space of an incandescent.
Steve
Logged
Steve
2015- 07 Contessa Bayshore C9, 400 hp
2013-2015: 00 Marquis Tourmaline, C12, 425 hp
2005-2013: 01 Contessa Naples, 3126B, 330 hp
Print
Pages: [
1
]
Go Up
« previous
next »
BAC Forum
»
General Boards
»
Technical Support
»
Ford Edge/Lincoln tail lights