« previous next »
Pages: 1 [2]   Go Down

Author Topic: Door seal and noise reduction  (Read 13168 times)

Dan Murphy

  • Guest
Re: Door seal and noise reduction
« Reply #15 on: May 18, 2015, 12:28:27 PM »
Joel

Let me try this again. Here is the part the tech said was bad.

Dan
Logged

Joel Ashley

  • BAC Member
  • *
  • Posts: 2362
  • Thanked: 808 times
  • OSU Class of '73, Oregon Native. RVing 39 years
Re: Door seal and noise reduction
« Reply #16 on: May 18, 2015, 11:55:05 PM »
You should be able to cipher which solenoid/valve you need from Norgren's website by simply looking for the valve number (I guess it's 1X1181), or just chat with them as I suggested.  And the Ebay ones may include the one you want too, for $50 or less perhaps.  If you don't see that exact number, Norgren should be able to provide the comparable one.

I also ran across this, but don't know if it's applicable to yours... you'd have to ask them
http://www.webstaurantstore.com/all-points-51-1388-solenoid-valve-repair-kit-new-style-kip-valves/AP511388.html?utm_source=shopping.com&utm_medium=cpc&utm_term=AP511388&utm_campaign=equipment%20parts

And also here:   https://www.dultmeier.com/manufacturers/kip-valves.php       for solenoids and repair kits.

You might also find this related video of interest, and it also clues us all into an easy way to check our expensive-to-replace alternators:     https://www.youtube.com/watch?v=JLUBt8sgKHA

Joel
« Last Edit: May 19, 2015, 12:38:03 AM by Joel Ashley »
Logged
Joel and Lee Rae Ashley
Clackamas, Oregon
36.9 ft. 2006 Monterey Ventura IV, aka"Monty Rae"
C9 400HP Cat
Pages: 1 [2]   Go Up
« previous next »