« previous next »
Pages: [1]   Go Down

Author Topic: Gen exhaust  (Read 3621 times)

Roy Lewis

  • Guest
Gen exhaust
« on: July 07, 2016, 09:21:22 PM »
Looking over outside of our 2002 Marquis Tourmaline I noticed the generator exhaust pipe was down a bit at the termination of pipe, 2 clamps screwed into belly the screws are gone. Can anyone tell me how long a screw they went into belly with?
Logged

Edward Buker

  • Guest
Re: Gen exhaust
« Reply #1 on: July 07, 2016, 11:39:11 PM »
You should be able to gauge the depth of the current holes with a piece of wire to obtain a screw length.

Later Ed
Logged

Lee Welbanks

  • Guest
Re: Gen exhaust
« Reply #2 on: July 07, 2016, 11:57:35 PM »
Roy, Two screws into the belly: belly of ?
My exhaust pipe support is mounted to the genie steel frame.
Logged

William Jordan

  • Guest
Re: Gen exhaust
« Reply #3 on: July 08, 2016, 01:03:52 AM »
Mine too . The gen is only connected to the frame of the generator support frame, as it moves with that frame .  You aren't referencing the Auga hot exhaust which is mounted to the " belly" are you  ? 
Logged

Roy Lewis

  • Guest
Re: Gen exhaust
« Reply #4 on: July 08, 2016, 04:05:43 AM »
I have 2 pipes terminating at same spot, 1 square Aqua hot and 1 round pipe. Our coach has side generator, 2002 Marquis Tourmaline.
Logged
Pages: [1]   Go Up
« previous next »