BAC Forum
Supporting the RV Lifestyle
Show the most recent posts.
Welcome,
Guest
. Please
login
or
register
.
1 Hour
1 Day
1 Week
1 Month
Forever
Login with username, password and session length
News:
Home
Help
Gallery
Login
Register
BAC Forum
»
General Boards
»
Technical Support
»
Girard awning
« previous
next »
Print
Pages: [
1
]
Go Down
Author
Topic: Girard awning (Read 3530 times)
william harrison
Guest
Girard awning
«
on:
July 12, 2017, 02:01:51 PM »
My Girard awning will extend but not retract with the
Motor. Called Girard and they told me there is a current limit
adjustment that is the likely problem. I can't find it
Or the anemometer box.
Any ideas?
Chuck 03 Marquis
Logged
Edward Buker
Guest
Re: Girard awning
«
Reply #1 on:
July 12, 2017, 04:41:48 PM »
William,
It should not be too far from the motor end of the awning and near the switch. Ours was behind a screw in panel over the entry door on an 02 Marquis. If you can pull the switch, follow the wires, they go to the control board.
Later Ed
Logged
Bill Staley
Guest
Re: Girard awning
«
Reply #2 on:
July 12, 2017, 09:02:30 PM »
I found ours in the medicine cabinet above the sink.
Logged
William Jordan
Guest
Re: Girard awning
«
Reply #3 on:
July 13, 2017, 05:40:34 AM »
Probably all different .. 03 Ruby .. Above the sofa in the cupboards on the left side ( door ) behind the end panel remove the back then the side panel.
Logged
Print
Pages: [
1
]
Go Up
« previous
next »
BAC Forum
»
General Boards
»
Technical Support
»
Girard awning