BAC Forum
Supporting the RV Lifestyle
Show the most recent posts.
Welcome,
Guest
. Please
login
or
register
.
1 Hour
1 Day
1 Week
1 Month
Forever
Login with username, password and session length
News:
Home
Help
Gallery
Login
Register
BAC Forum
»
General Boards
»
Technical Support
»
See-level install
« previous
next »
Print
Pages: [
1
]
Go Down
Author
Topic: See-level install (Read 2546 times)
Lawrence Tarnoff
Guest
See-level install
«
on:
June 22, 2018, 06:56:56 PM »
Hitting a snag on our install of tank monitoring system. Easy access to black and gray tanks, but tech says fresh water tank encased in metal with no easy access for the senders. Any ideas?
Logged
Jim Nichols
BAC Member
Posts: 224
Thanked: 87 times
Re: See-level install
«
Reply #1 on:
June 23, 2018, 05:05:57 AM »
If your tank level is visible from your bay door on the right side then access is in the bay next to it. The carpeted wood panels are held in place with wood screws. The tank sensor is in the middle of the 100 gallon tank. We just installed Sea Level system and they work great.
Logged
Jim/Natasha Nichols
05 Monterey 36'
400 Cat C9
Stan Simpson
BAC Member
Posts: 786
Thanked: 202 times
One mile South of the Cheddar Curtain
Re: See-level install
«
Reply #2 on:
June 23, 2018, 02:49:01 PM »
Bruce,
Here are pictures of our See Level. Our water tank is behind the front tire on the curbside, along with the Hydro Hot. Hope this helps, and you get it installed. Ours is the model that plugs in to the Aladdin interface module.
Logged
Stan Simpson & Becky Glover & Moe the cat
2005 Monterey Laguna IV
C9 400 Cat
Honda CRV toad
Bill Staley
Guest
Re: See-level install
«
Reply #3 on:
June 23, 2018, 03:06:41 PM »
What See-level system are you installing? I am trying to find one of the systems that plug directly into the Aladdin system and am being told that it has been discontinued. I can't find anyone that has one.
Logged
Lawrence Tarnoff
Guest
Re: See-level install
«
Reply #4 on:
June 24, 2018, 01:45:38 PM »
Bill ...
I also wanted to link to Aladdin but could not find the interface. The Bluetooth to iPhone is quite satisfactory.
Logged
Michael Rump
BAC Member
Posts: 102
Thanked: 45 times
Re: See-level install
«
Reply #5 on:
June 25, 2018, 02:07:28 AM »
Bill and Lawrence,
I heard they were having trouble with the Aladdin interface. Try calling Garnet Systems at 877.668.7813 for an update.
Regards,
Logged
Mike and Janis Rump
2004 Patriot Thunder
CAT 505 HP C12
2014 Honda CRV
Print
Pages: [
1
]
Go Up
« previous
next »
BAC Forum
»
General Boards
»
Technical Support
»
See-level install