I did some research on this when I was thinking about buying a spare wheel/tire.
There are a lot of factors to take into account.
Hub piloted
Rim size -- you already know this (22.5).
Rim width -- (8.25 is typical, 9.00 if you want to run the 315/80R22.5 tires as I have on my front axle).
Number of Studs -- 10
Stud diameter -- 26mm
Bolt circle -- 285.75mm or 335mm (measure your current hub size)
Bore -- 220 mm
Position -- All, Front, Rear, trailer
Offset, Outset (i.e. 6.60"), Inset (i.e. 5.79"), -- (measure your current wheels).
Polished -- one side, or both sides. (and protective coating or not: Durabright, AccuShiled, etc.)
Load factor -- 7400 @ 130psi
Also, if you are replacing steel wheel with aluminum you will need to install longer wheel studs.
https://buytruckwheels.com/collections/twenty-two-half