« previous next »
Pages: [1]   Go Down

Author Topic: Fluid samples  (Read 2610 times)

jeffprupis

  • Guest
Fluid samples
« on: January 24, 2019, 10:30:28 PM »
Just had fluid samples drawn by RING Power in Ocala, FL. $12.75 each vs $20-$30/ea + SH with JG Lubricant. They'll do my annual LOF too. All RING locations will honor that price I'm told.
Logged

Mike Shumack

  • Guest
Re: Fluid samples
« Reply #1 on: January 24, 2019, 10:57:14 PM »
That's a good price. I pay $25 a sample now through Blackstone Labs.
Do you live in central FL or are you just down for the winter?
Logged

jeffprupis

  • Guest
Re: Fluid samples
« Reply #2 on: January 24, 2019, 11:12:17 PM »
FT'r but  spend a month or so in FL. I bet any truck shop would be similar. They drew the samples (differential too) and will email results to discuss.
Logged

Jerry Emert

  • BAC Member
  • *
  • Posts: 1077
  • Thanked: 193 times
Re: Fluid samples
« Reply #3 on: January 25, 2019, 12:29:11 AM »
Jeff, how much for the LOF?  This Ring Power in Orlando wanted 700 or there abouts for LOF.  Just cost me a little under 400 at Alliance.  I got that, the generator serviced and the yearly on the HH for under a 1K and was happy!  kind of!  Nice meeting you by the way!  I gave the club info to the couple in the Contessa next to me.  Stay safe.
Logged
Jerry, Chief USN Retired
2003 Patriot Thunder Lexington 40' 3 Slides
C-12 Ser#  2KS89983
4000MH

jeffprupis

  • Guest
Re: Fluid samples
« Reply #4 on: January 25, 2019, 01:32:39 PM »
LOF $400-$450 incl filters, which I buy from them any way ($90 for oil & 2 fuel). It's as much about the price as the time involved. EMS download and 4 samples drawn in under 1 Hr. Went back for to replace Atmospheric Pressure Sensor in and out in less than 1 hour. Nice to meet you too. The power of BAC. See ya on the road.
Logged
The following users thanked this post: Jerry Emert

Mike Shumack

  • Guest
Re: Fluid samples
« Reply #5 on: January 25, 2019, 02:45:25 PM »
That's a good price. I'm not sure how much oil your C9 holds, but my C13 is 10 gallons (40 qts).

I changed my oil myself and it cost over $250 just for the oil (I use Rotella T6) https://www.walmart.com/ip/Shell-Rotella-T6-5W-40-Full-Synthetic-Heavy-Duty-Diesel-Engine-Oil-1-gal/102646780? and the fuel and oil filters are easily another $50 (not including the $100 for air filter). It took me a lot longer than hour to to do the work (so figure at least $200 in labor for a truck shop) - and then there is a hassle of disposing of the old oil.
Logged

jeffprupis

  • Guest
Re: Fluid samples
« Reply #6 on: January 25, 2019, 05:04:48 PM »
Quote from: Mike Shumack on January 25, 2019, 02:45:25 PM
That's a good price. I'm not sure how much oil your C9 holds, but my C13 is 10 gallons (40 qts).

I changed my oil myself and it cost over $250 just for the oil (I use Rotella T6) https://www.walmart.com/ip/Shell-Rotella-T6-5W-40-Full-Synthetic-Heavy-Duty-Diesel-Engine-Oil-1-gal/102646780? and the fuel and oil filters are easily another $50 (not including the $100 for air filter). It took me a lot longer than hour to to do the work (so figure at least $200 in labor for a truck shop) - and then there is a hassle of disposing of the old oil.

Exactly, my time is worth something + as a FTer, where would I do this and dispose of the oil (7.5G). No air filter in that price.
Logged
Pages: [1]   Go Up
« previous next »