When I press the switch for the tv to drop down and it starts and goes all the way to the viewing position.
Then the round motor left side toward the rear, I assume it ts the drive motor to lower and raise the tv from the open position to close in the ceiling, Starts to hum, loudly, and then the motor gets really hot. If I let it just hum the motor will not raise the tv to close position. If I press the switch to close then press the switch to open after a few time it stops humming. After the tv has been on for some time, and no humming it will just state to hum loud. am assuming I need a new open and close switch. I hope its that simple.