Thanks Fred, to clarify I do have 50 amp service at the power pedestal. The Aladdin indicates, "shore power selected" and 120 volts, but shows no amps draw. When I start the generator the Aladdin shows the transfer to the "gen-set" took place and also indicates 120 volts, but zero amp draw, which of course indicates power is present but not being used. I have checked all the breakers, 50 amp and the 30 amp panels. There are two breakers on the 30 amp panel that will not reset. But all other breaker are fine.
Also I thought power for the Air Conditioners did not pass through the inverter, so I can't understand why my AC's have no power?
Larry