BAC Forum
Supporting the RV Lifestyle
Show the most recent posts.
Welcome,
Guest
. Please
login
or
register
.
1 Hour
1 Day
1 Week
1 Month
Forever
Login with username, password and session length
News:
Home
Help
Gallery
Login
Register
BAC Forum
»
General Boards
»
Technical Support
»
No power to dash when key is switched on
« previous
next »
Print
Pages:
1
[
2
]
Go Down
Author
Topic: No power to dash when key is switched on (Read 4203 times)
Carl Boger
BAC Member
Posts: 438
Thanked: 132 times
Re: No power to dash when key is switched on
«
Reply #15 on:
November 12, 2019, 02:03:25 AM »
lets see if this one shows up
Logged
Carl
98 Beaver Patriot Savannah
330 hp Cat 3126
Joel Ashley
BAC Member
Posts: 2348
Thanked: 805 times
OSU Class of '73, Oregon Native. RVing 39 years
Re: No power to dash when key is switched on
«
Reply #16 on:
November 12, 2019, 03:17:44 AM »
Carl’s diode is mounted correctly. Although hard to see, the stripe appears to be on the left side.
I note a lot of corrosion around connection nuts though. That could be a venue for resistance. Remove and clean them up and spray with Corrosion-X. Also put some sort of desiccant device in that bay to help reduce moisture in its air.
Joel
«
Last Edit: November 12, 2019, 03:23:05 AM by Joel Ashley
»
Logged
Joel and Lee Rae Ashley
Clackamas, Oregon
36.9 ft. 2006 Monterey Ventura IV, aka"Monty Rae"
C9 400HP Cat
Steve Huber Co-Admin
Administrator Group
Posts: 3515
Thanked: 2698 times
Re: No power to dash when key is switched on
«
Reply #17 on:
November 12, 2019, 04:12:39 AM »
Carl,
It's a single rectifier diode to block voltage transients. it you want to test it with an ohm meter, it will show conduction in one direction and open in the other direction,
Steve
Logged
Steve
2015- 07 Contessa Bayshore C9, 400 hp
2013-2015: 00 Marquis Tourmaline, C12, 425 hp
2005-2013: 01 Contessa Naples, 3126B, 330 hp
The following users thanked this post:
Carl Boger
Print
Pages:
1
[
2
]
Go Up
« previous
next »
BAC Forum
»
General Boards
»
Technical Support
»
No power to dash when key is switched on