« previous next »
Pages: [1]   Go Down

Author Topic: 2002 Marquis Heater Control Valve Location  (Read 1183 times)

Dan Johnson

  • BAC Member
  • *
  • Posts: 63
  • Thanked: 15 times
2002 Marquis Heater Control Valve Location
« on: October 13, 2022, 10:47:19 PM »
Steve
I have a 2002 Marquis that lets heat into the heater core on AC but I have no generator  slide. I see you had a 2000 so I thought you might know where my valve would be located.
Logged
2002 Beaver Marquis Emerald
Cat C-12
Nebraska

Steve Huber Co-Admin

  • Administrator Group
  • *
  • Posts: 3517
  • Thanked: 2705 times
Re: 2002 Marquis Heater Control Valve Location
« Reply #1 on: October 14, 2022, 03:09:15 AM »
My 2000 heater core was on the driver side about level with the interior floor. Access was between the front cap and the firewall. Not sure about the heater control valve but suspect it is in same area. Should be a vacuum line running to it. I had to find a thin tech to replace the core. :)
Steve
Logged
Steve
2015-          07 Contessa Bayshore C9,  400 hp
2013-2015: 00 Marquis Tourmaline, C12, 425 hp
2005-2013: 01 Contessa Naples, 3126B, 330 hp
Pages: [1]   Go Up
« previous next »