Author Topic: kitchen cabinets draws  (Read 2273 times)

George Frudakis

  • Guest
kitchen cabinets draws
« on: August 13, 2023, 06:21:32 PM »
I have 2002 Marquis and cheery wood cabinets. Have an ice maker and want to remove and replace it with a drawer or one big cabinet door. Where can I find the parts?

Carl Boger

  • BAC Member
  • *
  • Posts: 505
  • Thanked: 146 times
Re: kitchen cabinets draws
« Reply #1 on: August 13, 2023, 11:19:05 PM »
George,

A good cabinet shop should be able to match a new cabinet to your old ones. The stain will be the tough part, but they can do a pretty good job especially if you have a small trim piece that they can match it to.
Carl

98 Beaver Patriot Savannah
330 hp Cat 3126

Bill Lampkin

  • BAC Member
  • *
  • Posts: 1251
  • Thanked: 349 times
Re: kitchen cabinets draws
« Reply #2 on: August 14, 2023, 12:57:50 AM »
I had to add a trim piece above our new refrigerator. I fretted about the stain until I found some cherry boards at home Depot. Tested the finish using urethane,one coat and the color was
 spot on
2005 Patriot Thunder Lexington, 3 slides
40' tag axle (short wheelbase)
525 hp C13

"Goin where the weather suits my clothes..."

Steve Huber

  • Administrator Group
  • *
  • Posts: 3699
  • Thanked: 1602 times
Re: kitchen cabinets draws
« Reply #3 on: August 14, 2023, 02:04:18 AM »
George,
Bill's advice is spot on. Most Beaver cabinets in cherry will match unstained cherry with polyurethane. If you decide to use stain, use ZAR. Don't waste your time with Minwax as  I've found it not to be a true cherry color. Ace often has ZAR.
Steve
Steve
Coachless
2015- 6/24  07 Contessa Bayshore C9,  400 hp
2013-2015: 00 Marquis Tourmaline, C12, 425 hp
2005-2013: 01 Contessa Naples, 3126B, 330 hp