Author Topic: replacing front DS/PS slide out cylinders 2006 monterey  (Read 2942 times)

John Ziomek

  • BAC Member
  • *
  • Posts: 15
  • Thanked: 4 times
replacing front DS/PS slide out cylinders 2006 monterey
« on: March 12, 2024, 08:33:11 PM »
I need to replace the cylinders on my 2006 Beaver Monterey due to corrosion which has torn one of my cylinder seals. I am looking for an installation/replacement manual for an HWH AP30761 and AP30763 cylinder. These are the driver and passenger slide-out cylinders.  Any leads or advice will be most welcome especially where I can purchase replacement cylinders.
I have already contacted Beaver in Oregon and they only have one with an exchange. Before I can even purchase one I still need to remove the existing one. Therefore the need for removal instructions.

Hoping this does not fall on deaf ears...lol

Thanks
JJZ
2006 Beaver Monterey 40'

Fred Brooks

  • BAC Member
  • *
  • Posts: 1617
  • Thanked: 749 times
  • RVIA Certified Luxury Technician 49 years, Retired
Re: replacing front DS/PS slide out cylinders 2006 monterey
« Reply #1 on: March 12, 2024, 08:50:23 PM »
    John,
If you go to our library of component installations and service you will find HWH systems under leveling. To get there go to the Beaver home page and select "technical" and a drop down menu and select coach assist. In the Library scroll down to leveling systems. Fred
Fred & Cindy Brooks
2000 Marquis, Jasper
C-12 Wild Cat (U of A)
2014 Honda CRV
Proverbs 3: 5 & 6

Bill Lampkin

  • BAC Member
  • *
  • Posts: 1234
  • Thanked: 360 times
Re: replacing front DS/PS slide out cylinders 2006 monterey
« Reply #2 on: March 13, 2024, 03:12:52 AM »
See az rv expert on you tube. James just did a video on that  n ot for the faint of heart!
2005 Patriot Thunder Lexington, 3 slides
40' tag axle (short wheelbase)
525 hp C13

"Goin where the weather suits my clothes..."

Joel Ashley

  • BAC Member
  • *
  • Posts: 2355
  • Thanked: 807 times
  • OSU Class of '73, Oregon Native. RVing 39 years
Re: replacing front DS/PS slide out cylinders 2006 monterey
« Reply #3 on: March 13, 2024, 08:10:37 AM »
As Fred recommends, you can find “leveling and room extension” info in Coach Assist under Leveling Systems.  But while there you might also scroll down a tad more to “Slide Out and Step Manuals”.

Joel
Joel and Lee Rae Ashley
Clackamas, Oregon
36.9 ft. 2006 Monterey Ventura IV, aka"Monty Rae"
C9 400HP Cat

Joel Ashley

  • BAC Member
  • *
  • Posts: 2355
  • Thanked: 807 times
  • OSU Class of '73, Oregon Native. RVing 39 years
Re: replacing front DS/PS slide out cylinders 2006 monterey
« Reply #4 on: March 13, 2024, 08:19:41 AM »
You might also look into whether a good machine shop can “rebuild” your cylinder(s).

Joel
Joel and Lee Rae Ashley
Clackamas, Oregon
36.9 ft. 2006 Monterey Ventura IV, aka"Monty Rae"
C9 400HP Cat

Eric Maclean

  • BAC Member
  • *
  • Posts: 1214
  • Thanked: 449 times
  • Karen and I would like to wish you all happy trail
Re: replacing front DS/PS slide out cylinders 2006 monterey
« Reply #5 on: March 13, 2024, 02:22:46 PM »
The cylinders can be rebuilt as shown in the video below but if the extension rod is rusted it is cheaper to replace the cylinder

Here is the link to the for mentioned video

https://youtu.be/PwEkLm89Ndw?si=LQahEsZpsu8TXORh


Here is a link to new cylinders

https://www.nwrvsupply.com/product/rap30761-cylinder-assembly-for-slide-out-mechanism/


Hope this helps
Eric
1997 Patriot Yorktown
3126-B
2009 Chevy HHR
Roadmaster falcon tow bar
Demco Air Force one tow brake.