Folks,  I have a 2005 Beaver Monterey with a networked Xantrex system.  This system controls the inverter, charger and Auto Gen Start and all items are networked together.  I know the AGS will work if the voltage drops below the set point.  What I am trying to find out is will the AGS activate with a termostat request.  At the 20 pin wiring harness there are 4 spots for T-stat wires, but there are none there.  In fact, there are not many wires there.  On the control panel there is a "trigger" for Enable temp 1 and Enable temp 2.  I guess my question is this:  does the control panel get the tstat feed or does it just send a signal to the AGS to monitor the wires there?  I hope this is not too confusing.
Dennis