Author Topic: Electric Dump Valves Multiple Switches  (Read 5662 times)

Richard And Babs Ames

  • Guest
Electric Dump Valves Multiple Switches
« on: January 13, 2010, 03:19:29 PM »
Since you all are talking about water pump switches I was wondering  if dump valves could be set in a similar fashion. Difference is tha it is not just an on or off switch but  an open or close sequence. The switches are in the bathroom currently and would like to have the ability to open and close from the ourside bay when flushing and getting ready to store.

Gerald Farris

  • Guest
Re: Electric Dump Valves Multiple Switches
« Reply #1 on: January 13, 2010, 09:57:57 PM »
It is possible to wire dump valves with multiple switches although not practical bacause in dump valve controls you change the polarity at the valve control motor instead of turning the current (power) on and off like you do in a water pump circuit.

Gerald

Gerald Farris

  • Guest
Re: Electric Dump Valves Multiple Switches
« Reply #2 on: January 14, 2010, 10:27:29 AM »
A fellow Beaver owner e-mailed me a source for a wiring harness to use 2 dump valve switches if you are using the Drain Master system.

http://www.drainmaster.com/staticpages/index.php/Drain_Master

Gerald