Author Topic: DOOR SPRUNG  (Read 2637 times)

KC Snellgrove

  • Guest
DOOR SPRUNG
« on: August 07, 2019, 05:21:15 AM »
Hello fellow Beavers. I have an issue with my door. I have asked, but nobody is fessing up on where or not they backed into the door. Besides who is guilty (giggles) what can I do. The door shuts, but the bottom (non hinge side) is about 1/2 inch out of alignment - SPRUNG. Any thoughts of how I can get it re-aligned? Who would you recommend? THANK YOU, KC

Mike Shumack

  • Guest
Re: DOOR SPRUNG
« Reply #1 on: August 07, 2019, 01:31:27 PM »
Try putting a wedge-shaped block of wood in the lower hinge area then using some force to push the door closed (or open - which ever way is opposite of the "sprung") that will usually work to tweak the door back into position. I have done this many times on automotive doors (although those are built a little stouter). It doesn't take a lot of force.
The following users thanked this post: Bryan Beamon

KC Snellgrove

  • Guest
Re: DOOR SPRUNG
« Reply #2 on: August 07, 2019, 05:10:41 PM »
Mike THANK YOU. Your response reminds me of what my Father would have told me. Simple, easy and efficient!
KC