BAC Forum
Supporting the RV Lifestyle
Show the most recent posts.
Welcome,
Guest
. Please
login
or
register
.
1 Hour
1 Day
1 Week
1 Month
Forever
Login with username, password and session length
News:
Home
Help
Gallery
Login
Register
BAC Forum
»
General Boards
»
Technical Support
»
Replacing existing tail lights with LEDS
« previous
next »
Print
Pages: [
1
]
Go Down
Author
Topic: Replacing existing tail lights with LEDS (Read 5469 times)
Jim Wasson
Guest
Replacing existing tail lights with LEDS
«
on:
August 13, 2009, 03:36:22 PM »
Would anyone have know who manufactured the tail and turn signal lights on a 2004 Beaver Santiam. They look like Chevrolet pickup lights to me, but I would like to confirm that if possible.
Thanks,
Jim
Logged
JimLNichols
Guest
Re: Replacing existing tail lights with LEDS
«
Reply #1 on:
August 14, 2009, 06:15:52 AM »
On my 2005 Monterey the taillights are from a 93 Mazda B2000 pickup. Also if you google the name on your existing taillight (Glo-Brite) you will find yours. There isn't an LED assy that I can find. You can replace the bulbs with LED bulbs. Just make sure the bulb has side facing diodes to light the sidemarker part of the lens reflector. There is a european style replacement for the 93 Mazda pickup, fancy but again no LED and $100 for the pair. I'm still seaching and will post if and when I find. Hope this helps...Jim Nichols
Logged
Jim Wasson
Guest
Re: Replacing existing tail lights with LEDS
«
Reply #2 on:
August 14, 2009, 02:51:04 PM »
Thanks Jim,
That is a good starting point. If you do wind up finding something I would appreciate knowing your source, I'll do the same on this end.
Best regards,
Jim
Logged
Richard And Babs Ames
Guest
Re: Replacing existing tail lights with LEDS
«
Reply #3 on:
August 15, 2009, 09:27:00 PM »
Usually you can take the part number off the tail liight and a body shop will point you in the right direction.
Logged
Print
Pages: [
1
]
Go Up
« previous
next »
BAC Forum
»
General Boards
»
Technical Support
»
Replacing existing tail lights with LEDS