I recently installed the bottom super slide seal on my 98 Patriot Monticello and did not finish taking photos because the post disappeared. I know how it comes apart and goes together now and I will add the photos I do have to this post. I was told by BCS that they crawled under the coach and changed the seals. I could no way fit so I decided the only way I could do it would be to take out both bins under the slide and I could reach the seal. I was in hopes to take photos of it step by step but it did not happen so if anyone has any questions I would be happy to help. All is put together with pop rivets and glue. I got all the parts from BCS. Here are the photos I have after taking the bins out. It was a lot of extra work taking both bins out but I was able to do it myself with a 1/16th drill bit, a pop rivet gun and spray on fabric glue from BCS. I also replaced the duct tape on all edges of the boxes using sticky tin duct tape for all edges and corners. (one of my bins was wet inside since I bought it and now it is dry. I am a happy man.