I have an appointment for a transmission oil change on Thursday. So I thought it best to see how to access the fill area. It seems to be another good design where the access panel is in a "L" shape with part of it up in the closet. Not totally solid, one large piece lying horizontal then a 5-6" piece going up - at the join I think it is just the carpet holding them together. However the large piece goes under the frame of the closet.
I think, although somewhat hesitant to do so, that part of the frame needs to be removed. The outside trim stays in place (no obvious way to remove it) however the inside flat piece (about 3-4" wide) should come out - 6 screws holding it. When it does then I think the carpet piece that is attached to it will also come thereby allowing the hatch cover to then slide out and under the closet frame. Not likely easily.
Problem is if I do this then either I do it after I get to the shop or risk having dust/debris coming up through the hatch AND having the closet doors swinging around. I guess they can come off, but that is even more work.
Alternatively, I suppose it may be possible to fill using the dip-stick pipe, but that will take a long time to get the gallons of oil in.
Anyone have experience with this?
Thanks,
Jeff