Author Topic: Tire Balance  (Read 2024 times)

Jim Edwards

  • BAC Member
  • *
  • Posts: 199
  • Thanked: 64 times
Tire Balance
« on: January 01, 2018, 12:27:26 AM »
Hi Due to an unfortunate incident I ended up having both front tires changes on the road. Consequently neither were balanced. They seem fine, no vibration, and there were no existing weights on the rims. so my questions are: Is this typical? Is balancing typically not required? Am I just lucky? Had Michelin XZA2 installed.
Please advise.

Thanks Jim 
Jim Edwards
2005 Monterey Laguna III, 40 ft Cat C9
2007 Country Coach Affinity 45 ft Cummins 600
15 Grand Cherokee

Pat Long

  • Guest
Re: Tire Balance
« Reply #1 on: January 01, 2018, 12:44:13 AM »
Use Dyna Beads for your tire balancing needs.   Just 12 oz. per tire

http://www.innovativebalancing.com/index.php
The following users thanked this post: Jim Edwards

Steve Huber Co-Admin

  • Administrator Group
  • *
  • Posts: 3532
  • Thanked: 2718 times
Re: Tire Balance
« Reply #2 on: January 01, 2018, 01:02:19 AM »
Beads work OK but be sure you use long value stem cores. The shorter ones will allow a bead to cause a leaky stem after adding air. I use Centramatic balancers on my coach.
Steve
Steve
2015-          07 Contessa Bayshore C9,  400 hp
2013-2015: 00 Marquis Tourmaline, C12, 425 hp
2005-2013: 01 Contessa Naples, 3126B, 330 hp
The following users thanked this post: Jim Edwards

Fred Cook

  • BAC Member
  • *
  • Posts: 499
  • Thanked: 84 times
Re: Tire Balance
« Reply #3 on: January 01, 2018, 02:23:54 AM »
Beads work OK but be sure you use long value stem cores. The shorter ones will allow a bead to cause a leaky stem after adding air. I use Centramatic balancers on my coach.
Steve

Roger... I use Centramatic too, great product. Check out Love’s truck stop. Big distributor and cheapest I found anywhere.
Fred & Cindy
2002 Beaver Patriot Thunder 455, C12 CAT
Towing 2019 Chevy Equinox, AWD Diesel
South Central Missouri, US Army Retired

Mike Shumack

  • Guest
Re: Tire Balance
« Reply #4 on: January 01, 2018, 11:43:24 AM »
The following users thanked this post: Jim Edwards