BAC Forum
Supporting the RV Lifestyle
Show the most recent posts.
Welcome,
Guest
. Please
login
or
register
.
1 Hour
1 Day
1 Week
1 Month
Forever
Login with username, password and session length
News:
Home
Help
Gallery
Login
Register
BAC Forum
»
General Boards
»
Technical Support
»
TRW Steering box question
« previous
next »
Print
Pages: [
1
]
Go Down
Author
Topic: TRW Steering box question (Read 2649 times)
Paul Aronson
BAC Member
Posts: 76
Thanked: 16 times
TRW Steering box question
«
on:
September 02, 2018, 04:41:18 AM »
I have a TRW steering box on my 2007 Beaver Patriot. There is a little more wander in the steering than I would like, is there an adjustment for play on the TRW box? Been through most of the other checks and just checking on this one.
Logged
2007 Beaver Patriot Thunder Winchester III
45' C-13 525 Hp
2013 Chevy Traverse
Keith Moffett
BAC Member
Posts: 1129
Thanked: 397 times
Every day is a blessing!
Re: TRW Steering box question
«
Reply #1 on:
September 02, 2018, 10:13:49 AM »
Paul
A previ9ous owner had a steering dampener installed (Safety Steer I thjink) on ours. Drives out great.
Logged
2007 Patriot Thunder
45' C-13
2006 Explorer Ltd.
DW is Carol
Safe travels and
May God bless!
Paul Meehan
BAC Member
Posts: 112
Thanked: 42 times
Travel with DW and two K9's
Re: TRW Steering box question
«
Reply #2 on:
September 02, 2018, 01:09:18 PM »
Keith,
I believe you might be referring to a Safe T Plus? We had one installed and it helped the handling of our coach.
http://www.safe-t-plus.com/rv
Logged
Paul and Peggy
St. Johns, Florida
2001 Patriot Ticonderoga 37' 2 Slides (2015-2019)
2014 Newmar Dutch Star 4369 (2019-Current)
2021 Jeep Grand Cherokee Limited
Mike Shumack
Guest
Re: TRW Steering box question
«
Reply #3 on:
September 02, 2018, 01:10:47 PM »
The TRW box does have an adjustment for gear lash. It is normally used during setup but some have reported less steering free play after tightening the adjuster nut.
be careful not to tighten too much or you can have poor "return to center". I would not tighten more than a 1/8 to 1/4 turn. But your really supposed to be do this while measuring rotational force on input shaft - so anything you do now is just guessing..
«
Last Edit: September 02, 2018, 01:17:22 PM by Mike Shumack
»
Logged
Paul Aronson
BAC Member
Posts: 76
Thanked: 16 times
Re: TRW Steering box question
«
Reply #4 on:
September 02, 2018, 04:34:43 PM »
Mike Thank You I do have a copy of the TRW manual but am reluctant to make any adjustments without doing a little research. I have installed a stearingdamper and yes it helps significantly but feel more improvement can be obtained.
Logged
2007 Beaver Patriot Thunder Winchester III
45' C-13 525 Hp
2013 Chevy Traverse
Doug Allman
Guest
Re: TRW Steering box question
«
Reply #5 on:
September 04, 2018, 09:34:46 AM »
Do not know if this will help as I do not know what make the steering box was on our 2004 Marquis.
With ours there seemed to be about 3/4" play in the steering wheel and you kept herding the coach down the lane. Found that the large nut that holds the pitman arm on to the steering box shaft was loose. You could tighten the nut but it did not change anything. Had one person turn steering wheel while other person watched pitman arm for movement. Arm moved but shaft did not for quite time left or right.
We removed the nut and found it had bottomed out on threads. Found a large washer to use as a shim and installed and tightened nut.
Results were a significant change in the play in steering and almost completely eliminated the wander effect.
Logged
Keith Moffett
BAC Member
Posts: 1129
Thanked: 397 times
Every day is a blessing!
Re: TRW Steering box question
«
Reply #6 on:
September 04, 2018, 09:44:27 AM »
Doug
There is a thread on here about our 02 Marquis that had the same problem though not due to threads. Someone had left ours loose.
Thanks for posting as perhaps more people will check theirs. I cant imagine the outcome had it gone badly!
Logged
2007 Patriot Thunder
45' C-13
2006 Explorer Ltd.
DW is Carol
Safe travels and
May God bless!
Print
Pages: [
1
]
Go Up
« previous
next »
BAC Forum
»
General Boards
»
Technical Support
»
TRW Steering box question