Plumbing Labels

[Dennis Belfils]

Does anyone know where to get replacement labels, for the Vanguard water manifold located in the wet bay?

[Bill Lampkin]

I had to touch up the wet bay panel labels, I used a Brother P Touch labelmaker. Very close to original. I tried to insert photo. but my pic is too big and I am too old to resize (the pic).

[Joel Ashley]

Call the company:  https://kscdirect.com/search_results.php?q=Vanguard%2BPlumbing%2BACCESSORIES

But as Bill suggests I’d use a label maker.  I use either my Dymo Labelwriter 450 or my Dymo LatraTag, depending on the need.  Both use thermal printing rather than ink.  The Labelwriter requires a computer but can make larger labels, such as for addressing envelopes. 

The LetraTag is probably more appropriate for your current project, being portable;  its plastic label option would be more moisture resistant.  The only negative aspect I’ve found is the clumsy design to peel backing off after creating a label.  But practicing technique has made it easier.

https://www.dymo.com/en-US/labelwriter-450-label-printer

https://www.dymo.com/en-US/letratag%3Csup%3E®%3C-sup%3E-plus-lt-100h-letratag-plus-lt-100h-silver

As Bill notes, Brother makes appropriate devices also and I’ve been tempted by several of their models, but already owned the Dymos.

https://www.brother-usa.com/ptouch/home?gclid=CjwKCAiA44LzBRB-EiwA-jJipKCPrnfai7dh3YvXMzLYVkxK1dHEtYKWqTlDXQNOYaEY_ZeVuRJsExoCyTwQAvD_BwE&ef_id=CjwKCAiA44LzBRB-EiwA-jJipKCPrnfai7dh3YvXMzLYVkxK1dHEtYKWqTlDXQNOYaEY_ZeVuRJsExoCyTwQAvD_BwE:G:s

 The point is you’ll find many future uses for such machines, so shop around and don’t be put off by prices.

Joel

[Dennis Belfils]

Thanx to you both. I will pick up a label maker as we could use it for other things too...……….