Fred
I already had the instructions, but thanks for the effort.
Eric
I can't find anything that might have caused the slide to go crooked (the driver's seat has been forward for several days as we moved the RV getting ready to head home). I opened all 4 release valves as soon as I got some tools yesterday (also found the reservoir cap) and tried to move the kitchen end of the slide where there is a 3/4 in. bolt on the end of the shaft using a socket and a breaker bar and then a 1/2 impact wrench. Won't turn either way. I measured the difference in how far each end of the slide is out: kitchen end is out 16 1/2 in. and the living room end it only out 8 in.
As for past extensions, the slide seemed to be a little jerky, but I can't remember one side starting in first.
Where would a rocking valve be located and how does that enter into fixing this?
Also, in the outside electrical compartment there is a button that is labeled HWH reset, what does that do?
And finally, does anyone have ideas on how to get the slide straightened out?
If I can get the slide in and locked I would like to head home (northwestern Montana) and find someone in the Spokane, WA to fix it.
By the way, it's 7:48 am here in AZ.