Author Topic: Slides  (Read 827 times)

Bobby Kirk

  • BAC Member
  • *
  • Posts: 144
  • Thanked: 15 times
Slides
« on: March 05, 2025, 04:54:47 PM »
 I have a 2006 Beaver Marquis  Having trouble getting slides to work properly. Had a slide repaired at Lazy Days in Wildwood Fl
Now slides work very slow..Pump runs but does not build up pressure.  Is there Bleed valves on the system.  How do I  bleed air out of the system  All help appreciated   Love the FORUM.

Bobby Kirk
2006 Marquis

Frank Bergamo

  • BAC Member
  • *
  • Posts: 309
  • Thanked: 88 times
Re: Slides
« Reply #1 on: March 05, 2025, 05:54:16 PM »
Have you checked the fluid level in the reservoir? It should be located in front of the steps underneath the front of the cap. Pull the generator slide out for easier access. Hope this helps.
Frank & Paulette Bergamo
2018-       : 2007 Marquis Topaz IV  C-15 600 HP Allison 4000
2014-2018: 2002 Marquis Emerald C-12 505 HP Allison 4000
2004-2014: 1986 Executive Diplomat 3208 250 HP Allison MT-643
Grand Junction, CO.

Bobby Kirk

  • BAC Member
  • *
  • Posts: 144
  • Thanked: 15 times
Re: Slides
« Reply #2 on: March 06, 2025, 02:32:40 AM »
Thanks Frank  Will check it.  Checked it before going to Lazy Days will check tomorrow

Bobby Kirk
2006 Marquis