OK - this is a new one on me and even being somewhat savvy I can't seem to figure this one out. My '06 Thunder has the generator mounted on an electrically operated slide at the front of the coach. For some reason, after a day or 3 of sitting, the gen slide starts to open up. When retracted, and even when it is slightly open, there is nothing loose about the mechanism. I can tug on the tray and it doesn't move in or out. I have also found that this has happened while the coach is in motion - arriving at a rest area and finding the tray open an inch or so. The drive motor is operated by a teeter-totter switch in the electric bay. The switch appears to operate normally and spring loads to the "off" position. It also takes more than 1/2 depression either way in order to get the motor to start up so I don't think there is anything wrong with the switch or contacts.
Anyone have anything like this happen and if so, what was the problem? Troubleshooting tips, suggestions and/or commiserations all accepted.
