« previous next »
Pages: [1]   Go Down

Author Topic: Front Leveling Jack not holding  (Read 5536 times)

Bryan Quinn

  • Guest
Front Leveling Jack not holding
« on: April 07, 2013, 08:19:06 PM »
Hi all,

Just wondering if anyone can shoot some advice my way; went camping for the first time this season, and my front end keeps dropping when I have the Beaver leveled with the leveling jacks.  I have a 1998 Beaver Contessa, 40', with three hydraulic jacks (one in front and two in back).  The rear jacks hold just fine, but the front drops significantly within an hour or so.  The system worked properly as recent as two months ago on a trip to Florida.  The jack cylinder doesn't appear to be wet.  

Thanks in advance,
Bryan
Logged

Richard And Babs Ames

  • Guest
Re: Front Leveling Jack not holding
« Reply #1 on: April 07, 2013, 08:55:24 PM »
RVA or Power Gear Jacks?
Logged

Bryan Quinn

  • Guest
Re: Front Leveling Jack not holding
« Reply #2 on: April 07, 2013, 09:13:38 PM »
Quote from: Richard And Babs Ames
RVA or Power Gear Jacks?

RVA
Logged

Richard And Babs Ames

  • Guest
Re: Front Leveling Jack not holding
« Reply #3 on: April 07, 2013, 09:24:55 PM »
Go to www.rvajacks.com and go to their trouble shooting guide. They also have good technical support if you call.
Logged

Bryan Quinn

  • Guest
Re: Front Leveling Jack not holding
« Reply #4 on: April 07, 2013, 09:50:10 PM »
I'll give that a look, thanks for the lead!!!
Logged
Pages: [1]   Go Up
« previous next »