Author Topic: Shoreline Cord Reels  (Read 6841 times)

Michael Kauffman

  • Guest
Shoreline Cord Reels
« on: March 01, 2016, 07:13:23 PM »
Hi Everybody,  I have a question about Shoreline Cord Reels.  I've gone through 2 of them since I've owned my rig.  They eventually lose one leg of the 240volts.  They use brushes on metal rings for the contacts.  They fail when lest expected.  Is it just me or is that a bad design?  I put in a 240volt receptacle in direct connect box for now.  But I don't like lifting that 50 amp cord around.

Is there anything better out there yet?  I see the Glendenning(?) for RV and marine that coils the cord instead of using contacts.  But they are pretty pricy.  Anything else out there?

Thanks, Mike
The following users thanked this post: Stan Simpson

Joel Weiss

  • Guest
Re: Shoreline Cord Reels
« Reply #1 on: March 02, 2016, 01:08:40 AM »
So far we've had no trouble with our reel.  If it fails I'll replace it; I don't want to lug the heavy cord.

Joel Ashley

  • BAC Member
  • *
  • Posts: 2455
  • Thanked: 771 times
  • OSU Class of '73, Oregon Native. RVing 40 years
Re: Shoreline Cord Reels
« Reply #2 on: March 02, 2016, 07:24:59 AM »
There's a used RLC here    http://en.visonerv.com/cgi-bin/md/M11567/s1.pl  . 

New ones are spendy, I agree, but ours works pretty well as long as I keep the cord clean upon retraction by holding a shop towel around it.  At least you'd be rid of the ring problem.

http://www.glendinningprods.com/store#!/RV-Cablemaster/c/3995560/offset=0&sort=normal

You might shop around online for a better RLC price, though I didn't see much.  You could call local RV dealers and BCS to see if they can do better than Glenndenning direct, and maybe save shipping by you picking it up yourself;  that's unlikely but worth a shot.

Joel
« Last Edit: March 03, 2016, 12:44:39 AM by Joel Ashley »
Joel and Lee Rae Ashley
Clackamas, Oregon
36.9 ft. 2006 Monterey Ventura IV, aka"Monty Rae"
C9 400HP Cat

Joel Weiss

  • Guest
Re: Shoreline Cord Reels
« Reply #3 on: March 02, 2016, 01:13:26 PM »

New ones are spendy, I agree, but ours works pretty well as long as I keep the cord clean upon retraction by holding a shop towel around it

In addition to doing what Joel suggests, I also make sure that all the cord has been dragged back to just under the location of the reel.  Furthermore, I also provide it some support with my hand as I retract it.  That way the reel isn't lifting and dragging all that much weight.

Jim Nichols

  • BAC Member
  • *
  • Posts: 224
  • Thanked: 83 times
Re: Shoreline Cord Reels
« Reply #4 on: March 03, 2016, 12:17:31 AM »
Replaced ours in September $600 new free shipping (eBay), used was $500.00 plus freight. 10 years is not bad for those contacts. It's just remembering to have all power (air cond's, hydro hot elect, etc) off before connecting and disconnecting from shore power.
Jim/Natasha Nichols
05 Monterey 36'
400 Cat C9

Michael Kauffman

  • Guest
Re: Shoreline Cord Reels
« Reply #5 on: March 10, 2016, 09:26:36 PM »
Thanks everybody.  I didn't know Glendinning made a slip ring model.  It's a little less too.  WooHoo!! 

Thaks again, Mike

« Last Edit: March 10, 2016, 10:01:53 PM by Michael Kauffman »